On-site material inspection
Kinerja
4.4/5
- ≤5hRata-rata waktu respons
- 97.1%Tingkat pengiriman tepat waktu
- US $220,000+{0} pesanan
Kustomisasi dari Desain
Kustomisasi Penuh
Identifikasi penelusuran bahan mentah
Pemeriksa QA/QC (4)
PRODUK UTAMA
Profil Perusahaan
Unduh laporan
by Intertek
by Intertek- Ikhtisar
- Tanggal pendaftaran perusahaan2014-04-08Luas lantai(㎡)11455Bahasa yang diterimaEnglishTahun mengekspor10Tahun di industri10
- Kemampuan produksi
- Lini produksi1Total output tahunan (unit)125831200Mesin produksi117
- Kontrol kualitas
- Dukungan Produk ketertelusuran bahan bakuYesMetode pemeriksaan produkInspection of all products, According to client's requirementKontrol kualitas dilakukan di semua lini produksiYesPemeriksa QA/QC4
- Latar belakang perdagangan
- Pasar utamaNorth America(28%), Western Europe(18%), Eastern Europe(10%)Mitra rantai pasokan25
- Kemampuan R&D
- Opsi kustomisasilight customization, sample processing, customized on demand, light customization, sample processing, customized on demand, graphic processingProduk baru yang diluncurkan pada tahun lalu2600Staf teknis R&D4Tingkat pendidikan staf teknis R&D4 graduate
Ulasan Perusahaan (10)
Everything turned our perfectly and the parts we requested are accurate!
Tanggapan dari pemasok:
Hi friend,
Thank you very much for your affirmation and hope there will be more opportunities to cooperate with you in the future.
24 Sep 2024
Here is what happened when we ordered 1000 small plastic gears. We recommend that you check the contract details carefully in advance when doing business with this supplier to minimize damage as much as possible. Of course, we will never do business with this supplier again.
1. They did not proceed without our urging.
2. 1000 pcs were delivered on May 19,2024. The center hole diameter should be Min.2.03 - Max.2.07. At all of 1000pcs, actual measurement is out of this agreement, 1.00mm to 1.90mm. And as attached photo, the burrs are also terrible.
3. We let them know all 1000 pcs were defective, we received an unbelievable response.
[If you pay an additional $570, we will deliver an additional 1000 more, total 2000 pcs. There is no other way. This time, our engineer will do it more strict.]
4. They said they would not refund the cost of mold. We spent a lot of time and work for refund, and finally after 3 months, we received a refund of about 20% of the total amount we paid.
Tanggapan dari pemasok:
About buyer's questions, here is our real & honest response.
1. Because of the special material, we have been keeping doing tests, testing again and again, which takes us a lot of time and cost, but the final test result is not satisfactory
2. The buyer's tolerance for the product is ±0.02mm, which is very cruel for plastic material by injection molding, we tried to let buyer mail the gauge, however buyer didn't provide the gauge. We want to reproduce according to buyer's gauge but were refused by buyer.
3. Raw material cost and production cost for 1000pcs small gears is very high. In order to minimize the lost, we are trying to communicate with the buyer to order 2000pcs, but we did not force the buyer to do it. And we agree to re-produce 1000pcs new gears after receiving the returned gears. But buyer did not agree, because buyer changed the material.
4. About mold fee terms, we have stated clearly at our quotation and Alibaba order, we did not cheat buyer.
12 Sep 2024